Volume Control - Plantronics CT10 Manual De Usuario

Ocultar thumbs Ver también para CT10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CT10MultiLangInside.R1
7/3/00
SPECIAL BUTTONS

VOLUME CONTROL

The Dual Function Volume Control Keys
allow you to adjust the sound level that you hear through the headset. This
feature is especially useful for people who have trouble hearing, or are in
an especially noisy area like a kitchen or workshop.
To increase volume, push and hold the ' / ' Key on the Remote for a
minimum of 2 seconds or until the volume is comfortable, then release the
key.
To decrease the volume, push and hold the ' /#' Key on the Remote for
a minimum of 2 seconds until the volume is comfortable, then release the
key.
Pressing the ' ' or '#' key for less than 1 second will cause the ' ' or '#'
to function normally as ' ' or '#' keys.
PAGE FUNCTION
The Page Button
on the Base allows someone to summon you. By
25
pressing the Page Button for less than 2 seconds, it sends a message to the
Remote by emitting two long, loud beeps.
If you have misplaced the Remote, press the Page Button for a minimum of
3 seconds and the Remote will emit a steady alert. Press the Talk Button
once you have located the Remote or put it into the Charging Well.
2:21 PM
Page 12
on the 12 Button Keypad
15
14
G
G
12
SPECIAL BUTTONS
VISUAL
REMOTE
3
In-Use Indicator Light
— Green LED is "On" only when Remote Talk
10
Button
is activated.
11
Mute Indicator Light
— Red LED is "On" only when transmit audio
4
is "muted."
BASE
19
Power Indicator Light
— Red LED is "On" whenever the power is
21
applied to the Base via the AC Power Adapter.
In-Use Indicator Light (Talk)
— Green LED is "On" only when
22
Remote Talk Button
is activated.
11
Charge Indicator Light
— Amber LED flashes for 2 seconds while
23
verifying contact when Remote is placed in Charging Well
remains "On" while charging and turns off when battery is fully
charged.
AUDIO
Low Battery — Two (2) beeps generated at 30 second intervals
whenever battery power is low, heard only through the headset in TALK
mode.
Out-of-Range — Three (3) beeps generated whenever the Remote is
taken out-of-range of the Base, heard only through the headset in TALK
mode.
13
G
G
. It
24

Publicidad

Tabla de contenido
loading

Tabla de contenido