Technical Specifications; Configure The Device - Urmet 2VOICE 1083/83-US Manual De Instalación

4. TECHNICAL
SPECIFICATIONS
Multi-user call sender device
External input voltage: .............................. 24 V
Maximum absorption: .............................. 200 mA
Absorbed power in operation: ................ max 6 W
Operating temperature: ........................ -5 ÷ +45 °C
Max humidity: ............................................ 95% RH
Ethernet interface: ............................. 10/100 Mbps
Wi-Fi: .. 2.4 Ghz (conforms to IEEE 802.11 b/g/n)
Dimensions (LxHxD):
140 (~8 DIN modules) x 90 x 60 mm
The product is designed to be
powered by an external power supply
Ref. 1083/24 supplied, by means
of 24 V terminals (6 W, 24 V). The
power output complies with limited
power source (LPS) specifi cations
and is protected against short-
circuit and overcurrent according to
EN 60950-1:2006+A11+A1+A12+A2.
Power supply (provided)
Power supply: .................... 100-240 Vac 50/60 Hz
Power: .................................................. 12 W max
Secondary output: ........................ 24 V
Power dissipated after after 1 hour of functioning:
Dimensions (WxHxD):
36 (2 DIN modules) x 98 x 60 mm
Wires with cross-section area of 0.5
mm or larger must comply with IEC
2
60332-1-2; wires with cross section
area smaller than 0.5 mm
with IEC 60332-2-2.
8
23 ÷ +113 °F
with internal antenna
5.51 x 3.54 x 2.36''
0,42A
max 11 Wh (~40 KJ)
must comply
2

5. CONFIGURE THE DEVICE

To confi gure and use the device, scan the QR-
Code with the camera of your smartphone or tablet
to download the Confi guration manual of the
CallMe app:
http://qrcode.urmet.com/default.aspx?prodUrmet
=150309&lingua=en
DS1083-127