Charging; Getting Started; Operation; Basic Operation - Oregon Scientific Ionic Cleansing & Nourishing Pro Manual Del Usuario

CHARGING

1. Connect the main unit with the
USB cable.
2. Connect the USB cable into
the USB power source, the red
LED indicator turns on steadily.
3. When the main unit is fully
c h a r g e d , t h e b l u e L E D
indicator turns on steadily.
NOTE
• USB hubs do not always
supply enough power for some devices.
• It is normal that the main unit is heating while charging.
• For protection purpose, the main unit does not work
while charging. Disconnect the main unit from the power
adapter before use.
• The main unit is capable for 5-hour operation after fully
charged (approximately 3 hours).

GETTING STARTED

1. Press the both sides of the cotton puff clip to release.
2. Place the cotton puff onto the metal massage head flatly,
make sure the cotton covers the metal message head
completely and the cotton puff is locked in the clip firmly.
3. Flip the cotton clip to fasten the cotton puff. You hear a
click when the cotton is fastened securely.
4. When the cleansing/ treatment is finished, press the both
sides of the cotton puff clip again to remove the cotton.

OPERATION

BASIC OPERATION

• Press the respective button to turn on the desired mode.
• Press again to switch into intermittent mode.
The indicator flashes.
• Press again to turn off.
5