Publicidad
Idiomas disponibles
Idiomas disponibles
HND 300| User Manual
The inspection camera will be shown as an external drive on the computer.
Connecting a Micro USB Cable for Data Transfer
Open the upper cover 10 and insert the micro USB cable 19 into connection 12 in the correct position.
After data transfer, remove the micro USB cable and close the upper cover again
Working Advice
- Check the area that you want to inspect and pay particular attention to obstructions or hazard areas.
- Bend the camera cable 13 in such a manner that the camera head can be easily inserted into the area subject to the inspection.
Carefully guide the camera cable in.
- Adjust the brightness of the illumination light 15 so that the image can be seen well. For heavily reflecting objects, as an example,
less light will provide a better image.
- When objects to be inspected are represented unsharp, reduce or increase the distance between camera head 14 and object.
Troubleshooting – Causes and Corrective Measures
Error indication on display Cause
Maintenance and Cleaning
Do not immerse the hand unit 1 into
water or other fluids.
Keep the inspection camera clean at all
times. Clean the inspection camera and
all auxiliary aids particularly thorough
after having worked in areas with
substances that are hazardous to one's
health.
Wipe off debris using a moist and soft
cloth. Do not use any cleaning agents or
solvents.
Especially clean the lens 16 of the camera
regularly and pay attention for any lint.
Français
Avertissements de sécurité
Caméra d'inspection digitale
Lire tous les avertissements de sécurité et
toutes les instructions.
Le non respect des avertissements et des instructions peut entraîner un choc électrique, un incendie et / ou des blessures graves.
Faites réparer la caméra d'inspection uniquement par l'intermédiaire d'un réparateur qualifié et en utilisant uniquement des
pièces de rechange identiques. Cela garantira le maintien de la sécurité de la caméra d'inspection.
Data subject to change without notice
Camera cable not mounted
Micro SD card not inserted or not correctly
inserted
Corrective Measure
Mount the camera cable
Insert the micro SD card and slide it all the way in.
9 | 20
Publicidad
