Product Operation; Use And Maintenance; Using The Rinslet; Cleaning The Rinslet - brondell Rinslet WS-11 Manual Del Propietário

PRODUCT OPERATION

Use and Maintenance

Using the Rinslet

To clean the bidet nozzle, turn the control arm to
the left towards the "Nozzle Cleaning" position and
water will wash over the nozzle.
For the general bidet wash function, turn the control
knob to the right towards the "Wash" position.
• The further the knob is turned, the higher the
water pressure will be.
• To lower the water pressure, turn the knob back
towards the center.
• To stop the flow of water, rotate the knob to
center so it sits flat.

Cleaning the Rinslet

To clean the nozzle, open the Nozzle Guard door
by pulling it gently open on the right side. With the
nozzle revealed, pull down on the nozzle cap, and
clean the spray holes and nozzle using a toothbrush
or soft cloth and mild detergent (such as dish soap).
When cleaning, be careful not to drop or flush
the nozzle cap. Periodically tighten the cap so it
doesn't become loose with use and cleaning.
To clean the Rinslet, use a mild cleaner such as
Simple Green or Windex spray. Do not scrub or use
harsh, abrasive products to clean the Rinslet, as
they may scratch the product.

Short Term Non-Use

If the product will not be used for more than a
few weeks, you may consider shutting the water
supply off at the wall for extra precaution.
Nozzle Cleaning
Wash
9