Hydraulic Diagram - Orkli OKSOL Manual Del Usuario

EN

6. HYDRAULIC DIAGRAM

The hydraulic installation requires the following components:
NUMBER DESCRIPTION
1 Shut-off valves (not included)
2 Filter (not included)
3 Pressure reducer (max. 10 bar) (not included)
4 Check valve (optional reference Orkli V-06416)
5 Safety valve (max. 10 bar) (optional reference Orkli 17121-00)
6 Mixing valve (optional reference Orkli S40000001)
The outlet of the domestic water circuit safety valve must always remain open, and led to a draining point.
It is recommended to place a drain valve between the inlet shut-off valve and the OKSOL.
Connections to the system are as follows:
28
HOT WATER OUTLET TAP (G-1/2" MALE)
COLD WATER INLET TAP (G-1/2" MALE)