Shielding - Exlar EXP-24 Manual De Instalación Y Servicio

+
24V Battery
_
Supply Negative (–)
to PE connection is
optional

Shielding

For best EMC practices all cables should be shielded and should have their cable shields connected to
the enclosures at the entry / exit point. This is most easily accomplished with EMC type cable glands
that provide 360° contact between the shell and shield.
Tape or heat shrink
applied to cable end
EXP 24 Manual
PN 47676
Revision H
EXP 24
PE Conductor
Controller
Grounding Diagram
38
Actuator /
Motor
Exlar Corporation
1/9/14
952-500-6200