Publicidad
Idiomas disponibles
Idiomas disponibles
4/5
3. Install the Lever Pivot Bolt (L)
F, (R) G and nut E.
Tighten the Lever Pivot Bolt (L)
F, (R) G and nut E to the
specified torque.
Tightening torque
2. Installation of Knuckle Cover
1. Install the Screw J, balancer,
Balancer Spacer C, expander,
spacer, washer, expander and
nut to the Knuckle Cover A.
2. Insert the Cover Spacer D into
the Washer (8.5
stick it to the Knuckle Cover A.
3. Tighten the Screw K to the
specified torque.
Tightening torque
GENUINE SUZUKI ACCESSORIES
F , G :
Lever Pivot Bolt
6 N·m (0.6 kgf-m, 4.5 lbf-ft)
E :
Lever Pivot nut
6 N·m (0.6 kgf-m, 4.5 lbf-ft)
16) I, and
×
K :
Screw
6 N·m (0.6 kgf-m, 4.5 lbf-ft)
, ,
Balancer
Spacer
Expander
Nut
Washer
Publicidad
