MBM SAE561M Manual Del Usuario página 19

Malfunctions are not always explained by the
quality of the components used. These
appliances are manufactured using top quality
components. Malfunctions may be caused by
voltage surges, or by dust or dirt infiltrating the
components. In any case, if anomalies are
Unauthorised persons should never attempt to repair the appliance, or
carry out maintenance. Tampering with the appliance voids the warranty.
MAINTENANCE - CHECKS - CONTROLS - CLEANING
Cleaning
Safety devices
Mechanical protective
devices
Controls
Structure of the
appliance
Safety signs
Electrical control panel
/ electronics
Electrical connection
cable and plug socket
Motor bearings (if
present)
General cleaning of the appliance and the
surrounding areas
Check proper functioning of safety devices
Check condition; check that there are no
deformations, loose parts or missing parts.
Check readability and condition of the
inscriptions and symbols and repair if
necessary.
Check the mechanical part to make sure
that it is not broken or deformed, tighten
the screws.
Tighten the main bolts (screws, fasteners,
etc.) of the appliance
Check readability and condition of safety
signs.
Check the conditions of the electrical parts
installed on the electrical control panel.
Check the wiring between the electrical
panel and parts of the appliance.
Check the condition of the connection
cable and plug socket.
Replace if defective.
Replace motor bearings
FAULTS
suspected, ALWAYS turn the appliance off and
call the authorised repair service.
These appliances are manufactured using high
quality components. Malfunctions may be
caused by voltage surges, dust and/or dirt
infiltrating the components.
FREQUENCY
Daily or based on the
degree of use
Monthly
Monthly
Yearly
Every three years
EN - 9
REPAIR
USER
SERVICE
Yes -
Yes Yes
Yes Yes
Yes Yes
Yes Yes
- Yes
Yes Yes
- Yes
Yes Yes
- Yes
- Yes