Unpacking; Correct Use; Intended Use; Useful Facts - IKA ULTRA-TURRAX Tube Drive Manual De Instrucciones

Unpacking

Unpack:
- Please unpack the device carefully.
- Any damage should be notified immediately to the shipping
agent (post office, railway network or logistics company).
Delivery scope:
- Tube Drive
- Plug-in power supply with interchangeable adapters
- Removal hook
- Operating instructions
- A warranty card.

Intended use

Use:
Application
Mixing
 with Tube ST-20...
Stirring
 with Tube ST-50...
Dispersing
 with Tube DT-20...
Stirring
 with Tube DT-50...
Crushing
 with Tube BMT-20...
 with Tube BMT-50... Mixing
wet/dry
Crushing
 with Tube BMT-20-S-IVD 
Mixing
BMT-20-C-IVD 
wet/dry
Note: for BMT-20-S-IVD/BMT-20-C-IVD:

max. speed: scale 4
max. Timer: 1 min.
Range of use:
Indoor environments similar to that a laboratory of research, teaching,
trade or industry.
The safety of the user cannot be guaranteed:
- If the device is operated with accessories that are not supplied or
recommended by the manufacturer
- If the device is operated improperly contrary to the manufacture's
specifications
- If the device is operated improperly contrary to the manufacturer's
specifications.

Useful facts

Changes in viscosity and volume caused by processing of dispersion
media may cause small fluctuations in the speed of the device.
Volume Mode

Commissioning

2 - 15 ml Seconds and
15 - 50 ml minutes mode
Pay attention to the ambient conditions listed in the "Technical
5 - 15 ml Seconds and
Data".
15 - 50 ml minutes mode
Position the rotating knob (B) at the left stop
2 - 15 ml Seconds and
15 - 50 ml minutes mode before starting up.
2 - 15 ml Seconds and
If these conditions are met, the unit is ready for
minutes mode
service when the mains plug has been plugged in.
Switching on:
Press "Power" button (A).
Previous mode and time settings will be
displayed e.g. :
(Factory setting: -2)
12