Publicidad
Idiomas disponibles
Idiomas disponibles
MANTIS COMPACT
Packing Contents
Bench stand
Viewing head
Objective lens
Rubber gaiter
Floating stage (optional)
Specimen holders
Assembly
Floating stage (optional)
X With the stage glass
removed, place the floating stage
u
and secure it into its locating holes
Allen key located on the underside of the floating stage.
X Replace the stage glass.
X The removal of the floating stage is the reversal of the assembly procedure.
Head & Power Connectors
j
Place the rubber gaiter over the stand neck.
k
Loosen the upper retaining bolt
retaining bolt
. Carefully place the locating hook of the Mantis viewing
v
head
over the upper retaining bolt on the bench stand.
w
Replace the lower retaining bolt, ensuring the lower retaining bolt passes
through the lower locating mount of the Mantis viewing head.
Tighten the upper and lower retaining bolts then re-seat the rubber gaiter.
l
Remove the red transit plug from the underneath of the viewing head.
m
Connect the head power lead
of the viewing head.
n
Connect the mains lead plug to a suitable power outlet and its output
connector to the rear of the bench stand.
o
Fit and lock the chosen objective lens into the objective seat.
Operation
Overview
X Turn on the power switch
u
the Mantis lens.
Focus
X Use the focus controls
(one each side) to raise or lower the viewing head
v
until the subject is in focus.
Eye Spacing
Adjust the eye spacing control
w
Note:
Adjusting the eye spacing is very important for viewing
comfort and must be adjusted for each Mantis user.
Changing Lenses
X To change the objective lens, twist and remove lens
supplied container.
X Fit and lock the chosen objective lens into the objective seat.
Illumination
X Turn on the substage illumination switch
the illumination level.
X Turn on the surface illumination switch
the illumination level.
Mantis Compact with Bench Stand - User Guide
6
in position
v
with the bolts supplied using the
w
on the stand neck. Remove the lower
u
between the stand base and the rear
x
and place the subject on to the stage beneath
to obtain a comfortable stereo view.
. Store the lens in the
x
and use it to increase or decrease
y
and use it to increase or decrease
z
3
6
x
1
4
2
5
3
6
u
v
w
2
u
w
1
v
v
v
5
x
v
w
y
u
z
www.visioneng.com/support
4
Publicidad
