Vision Engineering Mantis Guia Del Usuario página 7

Routine maintenance
Desiccant Replacement
The desiccant removes excess moisture from the optical head.
X Disconnect the power supply from the bottom of the head.
X Remove the screw securing the desiccant cover
and remove the old desiccant.
X Insert the new desiccant and replace the desiccant cover.
LED Arrays
X Remove the desiccant cover .
u
X Remove the two crosshead screws that secure the LED array
remove the array complete with filters
X Reassembly is the reverse of this procedure.
General care
X Cover your Mantis with a dust cover when not in use.
X Remove dust with a soft brush or cleaning cloth.
X The Mantis viewing screen and lenses should be cleaned with a lens cleaning cloth.
X Keep accessories in a dust-free environment when not in use.
Service
Service and repair work must only be carried out by service engineers authorised by Vision Engineering.
Specification
Objective Lenses
Objective Lenses
x2
x4
x6
x8
Lighting Data
LUX intensity measured at subject plane with colour correction filters.
20 LEDs
Substage illumination (bench stand only)
58 LEDs
Warranty
This product is warranted to be free from defects in material and workmanship for a period of one year from the date of invoice to the original purchaser.
If during the warranty period the product is found to be defective, it will be repaired or replaced at facilities of Vision Engineering or elsewhere, all at the option of Vision
Engineering. However, Vision Engineering reserves the right to refund the purchase price if it is unable to provide replacement, and repair is not commercially practicable or
cannot be timely made. Parts not of Vision Engineering manufacture carry only the warranty of their manufacturer. Expendable components such as fuses carry no warranty.
This warranty does not cover damage in transit, damage caused by misuse, neglect, or carelessness, or damage resulting from either improper servicing or modification by
other than Vision Engineering approved service personnel. Further, this warranty does not cover any routine maintenance work on the product described in the user guide or
any minor maintenance work which is reasonably expected to be performed by the purchaser.
No responsibility is assumed for unsatisfactory operating performance due to environmental conditions such as humidity, dust, corrosive chemicals, deposition of oil or other
foreign matter, spillage, or other conditions beyond the control of Vision Engineering.
Except as stated herein, Vision Engineering makes no other warranties, express or implied by law, whether for resale, fitness for a particular purpose or otherwise. Further,
Vision Engineering shall not under any circumstances be liable for incidental, consequential or other damages.
www.visioneng.com/support
, lift the cover off
u
and
v
.
w
Working Distance
167mm
96mm
73mm
58.5mm
9,400 LUX
2,700 LUX
w
v
Power Supply
Field of View 100-240VAC 50-60HZ 1.0A Max
45.0mm
Accessories
27.5mm
Lens protection caps
19.2mm
Floating Stage (for bench stand only)
Dust Cover
14.3mm
Replacement surface LED array
10,000 hours
10,000 hours
Mantis Compact with Bench Stand - User Guide
MANTIS COMPACT
u
w
7