Start-Up Guide; Contents Of The Packaging; Battery Information - LEXIBOOK JG7100 Manual De Instrucciones

Start-up Guide

This section explains how to use your TV Fitness Center wireless game. Read the following
instructions to discover all its functions. Ask an adult to read and understand the safety
instructions.
1. Using a screwdriver, open the battery compartment under the console. Install the
4 x LR6/AA type batteries. Close back the battery compartment and tighten the screw.
2. Using a screwdriver, open the battery compartments on the wireless controllers. Install
the 2 x LR03/AAA type batteries, close the battery compartments and tighten the screws.
3. Connect the console cables into the A/V outlets of your television by matching the
corresponding colours of the cables and the A/V outlets.
WARNING: Switch off the TV and the console before making all connections.
4. Switch on the TV and select the AV channel. Press the ON/OFF key
console. You may need to tune in the AV channel using your TV controls. Refer to your
TV manual for how to do this.
5. After the start-up screen, press the START key to open the game selection screen.
To select a game you can use any of the following keys: the SELECT key on the
console, the LEFT and RIGHT footpads, the SELECT key on the left hand controller.
6. Then press the START key on the console, or the CONFIRM key on the right hand
controller, to confirm and start playing. For more details on the games, please go to the
<<Games>> section (p.9).

Contents of the Packaging

1 interactive mat
2 wireless controllers
1 AV cable
1 instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are
not part of this toy and should be discarded for your child's safety.

Battery Information

The TV Fitness Center console operates with 4 X 1.5 V AA/LR6
1.5 V AAA/LR03
Note: Batteries are not included with this product.
Console:
1. Use a screwdriver to open the battery compartment located
under the console.
2. Install the 4 x LR6/AA type batteries observing carefully the
polarity indicated at the bottom of the battery compartment
and as per the diagram shown opposite.
3. Close the battery compartment and tighten the screw.
type batteries for each wireless controller.
8
to switch on the
type batteries and 2 X