Sinbo SKS 4516 Manual De Instrucciones página 5

ERROR DISPLAY INTRODUCTION
When the scale is over loaded, the "O-LD" will appear on the display.
When the screen shows " LO ", it means that there is a power shortage, please change
the batteries as soon as possible.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
Use 2 x AAA.
When you change the batteries, please open the battery cover on the back, put 2 pcs AAA
battery in the battery case, then close the battery cover tight.
ADVICE FOR USE AND CARE
• Always put the scale on a clean and flat table.
• The max. weight the scale can handle is 2000g or 1200ml
• To ensure the life of the scale do not put the scale under wet, hot & cold conditions.
• The product is a high precision electronic weighing apparatus. Therefore do not drop
otherwise the scale can be easily damaged.
• If the scale surface is dirty, please clean the scale with soft cloth, do not use any
chemical detergent and don't allow water to get inside the scale.
• If the result appears improperly, please check about whether the batteries and the
touching point contact well. Replace with new batteries if used for a long time already,
then try again.
- 4 -