W+W EN 81-20 Manual De Instrucciones página 15

5.0 Mounting of the extension package (optional only for the rigid version)
The rigid guard rails can be extended with an extension package. For this purpose the handrails or the
cross bars are connected to each other by means of connecting elements.
5.1
First remove the corresponding end caps on the handrail and the cross bar.
If necessary, cut the handrail and the cross bar to the required length.
5.2
Put one sheet plate of 195x53mm into the handrail and one into the cross bar.
5.3
Put one press nut 195x53mm with screws into the handrail and one into the cross bar.
5.4
Connect the handrail and the cross bar of the basic package and the extension backage with each
other. Both ends have to be joined seamlessly.
© W W 09/2018 Version 3
+