turbionaire LINEA 90 Manual De Instrucciones página 11

INSTALLATION
A. Installing on the concrete wall:
4.1.1 Removed the mounting plate
Remove the plastic parts, unclamping the
fixed screws on the back of main body to
remove the mounting plate.
MOUNTING PLATE
PLASTIC PARTS
4.1.3 When the cement has freeze,
fit the mounting plate (use the
washer and nut according to the
following)
4.1.2 Fix the bolts in the proper position
(fix the position with the mounting plate
and pour cement into the bolt holes.)
2
1
1
2
4.1.4 Install the main body
Set the main body onto the upper end of the
mounting plate, and clamp it as below. Make
sure it's well fixing