Stages cycling Stages Power L Manual Del Usuario página 7

Pairing the Power Meter
The power meter must be connected or "paired" to the cycle computer
or mobile device (collectively referred to as head units) according to the
display manufacturer's instructions. Each power meter has a unique
ANT+ device ID and a unique Bluetooth ID. During the pairing process
the applicable device ID is recorded by the display and will be used
to communicate with the corresponding power meter. The ANT+ ID
number is printed on the back of the power meter and also supplied
with the documentation. For Stages Power LR meters, the left power
meter's ANT+ ID is used for both sides (See: Linking Left and Right
Power Meters). When pairing via Bluetooth, the device name will also
contain the ANT+ ID. Once paired to the power meter, ride data (cadence
and power) will be transmitted from the power meter to the head unit.
Other important functions such as performing zero reset on the power
meter will also be enabled through the head unit. Both the ANT+ and
Bluetooth IDs are permanently assigned to the power meter and are not
affected by changing the power meter battery.
• Ensure the power meter has a fully charged CR2032 battery
properly installed.
• Rotate the crank arm one time to ensure the power meter is awake
and ready to communicate.
• Follow the ANT+ or Bluetooth reading device manufacturer's
instructions for pairing a power meter to the head unit. The
procedures may vary between manufacturers.
Stages Power App
Stages Cycling provides an accompanying app to the power meter,
check battery life, and test power meter functionality. To learn more or
download the Stages Power app to your compatible mobile device, go to:
www.stagescycling.com/support-app
English
7