Twin-Star International 23DE9124 Instrucción De Montaje página 6

3. Insert one Wood Dowel (CC) into each of the
pre-drilled holes in the center shelf (D). Put the
Upper Side Panels (I) snug to the Center Shelf (D).
Make sure the wood dowels are seated in the
pre-drilled holes.
Hardware Used
CC Wood Dowel
4. Insert one Wood Dowel (CC) into each of the
pre-drilled holes on the top of Upper Side Panels (I).
Then locate Mantel/Top (G) and lay fi nished side up
on top of completed assembly. From the inside,
attach Mantel/Top (G) using Bolts (AA) through the
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
AA
Bolt
CC Wood Dowel
5. Attach Side Back Panels (J) and Center Back Panel
(K) to the back of the completed assembly from step
4. Use a Phillips Head Screw Driver, tighten Wood
Screws (EE) through the pre-drilled holes in the Side
Back Panels (J).
Hardware Used
Screw
EE
Fig. 3
x 4
Fig. 4
x 4
x 4
Fig. 5
x 28
5
I
CC
AA
G
CC
EE
J
I
K
J