Vacuum Cleaner Assembly - ARIETE 2786 Manual De Instrucciones

DO NOT THROW AWAY
THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (FIG.1)
A Carry handle
B Lever to open the dust bag compartment
C Button to open the attachment compartment
D Cord re-wind switch
E Bag full indicator
F Suction power adjustment panel
G In/Off Start button
H Dust bag compartment
I Flexible hose
L Crevice nozzle

VACUUM CLEANER ASSEMBLY

Insert the hose into the suction opening, pressing it down until it slots into place. To remove the hose,
press the two release buttons together and pull it out (FIG. 2).
CAUTION: Before fitting or removing attachments, always be sure to unplug the appliance from the
mains power.
ATTACHMENTS
Telescopic tube (O)
Insert the extension tube onto the handgrip and then fit the required attachment, such as the crevice
nozzle or the small cleaner. Once the attachment has been inserted, it is possible to extend the tel-
escopic tube to the required length using the lever (FIG. 3). Release the lever to secure the tube at
the required length.
Floor brush (T)
Suitable for cleaning any type of surface. Use the device on the top part to:
- retract the bristles when cleaning carpets or rugs;
- lower the bristles for smooth flooring, such as PVC, parquet or tiles.
M Small nozzle
N Brush for small nozzle
O Telescopic tube
P Release buttons
Q Hand grip
R Suction control
S Hard floors/carpet selector
T Floor brush
U Paper dust bag
V Fabric bag
- 7 -
EN