Labeling A Motion Display; Connecting Auxiliary Audio Equipment (Cdx-M770 Only) - Sony CDX-M770 Manual De Instrucciones

Labeling a Motion Display

You can label a Motion Display with up to 64
characters to appear when the unit is turned off.
Labels will scroll in the display in the M.Dspl 1
mode (the display remains lit even when the
power is off).
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU), then press M or m
repeatedly until "Name Input"
appears.
3
Press (ENTER).
4
Enter the characters.
1 Press (DSPL) to select the character
type.
A a 0
t t t
2 Press M*
1 repeatedly to select the
desired character.
A B C
t t t
2
! "
t ... t t
*1 For reverse order, press m.
*2 (blank space)
3 Press , after locating the desired
character.
If you press <, you can move back to the
left.
4 Repeat steps 1 to 3 to enter the
entire sentence.
5
Press (ENTER).
Tips
• Simply overwrite or enter "
sentence.
• To erase all sentences, press (ENTER) for 2
seconds after step 4-2.
A
x y z 0
... t t t t
A
# ...
t t * 2 t
" to correct or erase a
Connecting auxiliary audio
equipment (CDX-M770 only)
You can connect auxiliary audio equipment to
this unit with the AUX IN connector.
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
Adjusting the volume level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU).
2
Press M or m repeatedly until "AUX
Lebel" appears, then press (ENTER).
3
Press M or m to select the desired
volume level, then press (ENTER).
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
4
Press (ENTER).
1
To deactivate "AUX-A" in the music
source display
1
Press (OFF).
CD/MD playback or radio reception stops
(the key illumination and display remain on).
2
Press (MENU).
3
Press M or m repeatedly until "AUX-A
on" appears.
4
Press < or , to select "AUX-A off."
5
Press (MENU).
To restore the indication, select "AUX-A on."
27