Publicidad
Idiomas disponibles
Idiomas disponibles
underground, which is not insensitive for wet surroundings like a
television, HIFI or a bench.
• Take the water tank from the base, open the water lid by turning it
anticlockwise, fill in water, make sure that the silicon washer is well
fitted in its place and then close the water lid by turning it clockwise.
• Connect to power supply and turn on the switch. Setting proper mist
intensity by turning the mist intensity controller.
• Make sure that sprayer will be fixed to the middle of the room, without any
obstruction.
6.
Cleaning and maintenance
•
Water tank
•
Transducer
Due to geographic factors, water quality may differ from place to place. Some places
have hard water, which contains a large quantity of calcium and magnesium ions.
Furthermore, the use of bleaching power (to purify water) also increases the
hardness of water. When this kind of water is used to humidify the air, calcium and
magnesium ions are diffused together with the mist. As time goes on, there will be
sediments of scale on the object surfaces and ground. Meanwhile, there will also be
sediments on the transducer and the water groove, which is to affect the functioning
of the humidifier. To clean the transducer, please;
•
Base
• The water tank should be cleaned frequently. It is
recommended to clean once every 3 days.
• Water should be changed frequently. It should not be kept in
the water tank more than 2 days.
• Add some cleanser (about 0.5g) on the transducer, add some
water, and wait for 2-5 minutes.
• Use a soft brush to clean the surface of the transducer. Don't
use hard tools to scratch its surface.
• Use cleanser, which you can buy in a market, for cleaning this
kind of plastic appliances.
• Do not use soap or other alkaline substances to clean the
transducer.
• Do not put this humidifier or some parts into the dish washer.
• If the water groove and water level detector have scale
sediments too, please use the cleanser to clean, and then
wash the water groove with clean water.
• Do not immerse the base in water and make sure that no water
20
Publicidad
