Sony Ericsson HCA-200 Manual Del Usuario página 5

1. Disconnect the car battery.
2. Place the electronic box under the dashboard of the
car, for example. See the illustration on page 2. Use
the velcro to fasten the electronic box.
3. Connect the bundle of power cables (red and black),
the music mute cable (yellow) and the ignition sense
cable (blue) to the electronic box (socket H).
4. Connect the black power cable to negative ground.
Connect the red power cable via the fuse kit to the
car battery, 12 volts.
Note: Please note that supply voltages other than
12 volts may cause damage to the equipment.
5. Connect the blue ignition sense cable to the ignition
of the car. See I in the illustration on page 2.
6. Connect the yellow music mute cable to the car
stereo. See J in the illustration on page 2.
7. Place the microphone on a fixed part of the car
interior, directed towards the driver. Connect the
microphone to the electronic box (socket C).
8. Place the loudspeaker at least 50 cm (20 inches)
from the microphone. Connect the loudspeaker to
the electronic box (socket B).
This is the Internet version of the user's guide. © Print only for private use.
9. Replace the connector in the car holder with the
connector attached to the system cable. See the
pictures below.
10.If an external antenna is to be used with the car
handsfree, see To attach an external antenna to the
car holder, before you continue with step 11.
11.Choose a suitable location on the dashboard of
the car for the car holder. The driver must be able
to reach the phone keypad from the normal driving
position. Fasten the car holder to the location you
have chosen.
12.Connect the system cable to the electronic box
(socket F).
13.Connect the car battery.
Installing the car handsfree 5