Connections - Denon DCD-F101 Instrucciones De Operación

4

CONNECTIONS

Connecting to the D-F101 Series
When connecting to a receiver other than the one in the D-F101 series, there is no need to make connection 2. Note
2
that in this case none of the system functions (auto power on, etc.) will work.
• System operations such as the auto power on function can only be used if stereo audio cords and system cords are
connected between all the system components. Be sure to securely connect all the connection cords between all the
units.
• Disconnecting a system cord during system operation may result in malfunction. Be sure to unplug the power cords
before changing the connections.
• Install the components in such a way that the ventilation holes of the receiver (DRA-F101) are not obstructed.
• Use the AC OUTLET for audio equipment only. Do not use them for hair driers, etc.
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Power plug
(for U.K. model)
Receiver
DRA-F101
FM COAX.
AM LOOP ANT. 1 2 SYSTEM R L
75 CONNECTOR
ANTENNA
+
L INPUTS TAPE MD
PRE
OUT
-
AC OUTLET
230V 50Hz
SWITCHED
SPEAKER SYSTEM W MAX
R
SUB
SPEAKER IMPEDANCE 4~16
PHONO CD DVD/AUX PB REC PB REC WOOFER
MD-recorder
DMD-F101
Connect the DCD-F101's LINE OUT jacks to the
1
receiver's CD input jacks using the included
stereo audio cord.
Connect the DCD-F101's
CONNECTOR jack (1 or 2) to the SYSTEM
2
CONNECTOR jack (1 or 2) of one of the other
components using the included system cord.
Connect the DCD-F101's optical digital output
terminal (DIGITAL OPTICAL OUT) to the digital
3
input terminal (DIGITAL OPTICAL IN 1 or 2) of
the MD recorder using optical connection cords.
Connect this unit's power cord to the AC outlet
4
on the Receiver (DRA-F101) or one of the other
components.
CD player
The DCD-F101 can also be used when connected
DCD-F101
to a receiver other than the one in the D-F101
series. In this case, none of the system functions
(auto power on, etc.) will work.
• Do not place another component directly on top of the
receiver (DRA-F101).
• For stability, do not stack more than three components
on top of each other.
POWER LOADING MECHANISM
DMD-F101
ON / STANDBY
18T r0 2 m 4 6 s
L
1 dB -60 40 -30 -20 -12 -6 -2 0
R
DCD-F101
ON / STANDBY
TRACK
NOTES:
• Do not plug power cords into power outlets until all
connections have been completed.
• Check the left and right channels and be sure to
interconnect them correctly (R to R, L to L).
SYSTEM
• Plug in the power cords securely. Incomplete
connections will result in noise.
• Clasping the power cords and connection cords
together may result in humming or noise.
• After unplugging the power cord, wait at least 5
seconds before plugging it back in.
Recommended System Installation
• To ensure performance and stability, install the D-F101
series as shown below.
1 3
MEMORY TUNING
FUNCTION TONE TIMER RDS / SET DOWN UP
SYSTEM
ON / STANDBY
INPUT MEMO REC / EDIT CD SRS MULTI REC
CHARACTER PHONES
- +
REC LEVEL
/ ENTER
MINIDISC RECORDER DMD-F101
e
ON / STANDBY
REPEAT
DOLBY NR
CD SRS REC 0 PLAY 1
ON
OFF
COMPACT DISC PLAYER DCD-F101
ENGLISH
VOLUME
SOURCE
BAND DIRECT
DRA-F101
AM-FM STEREO RECEIVER DRA-F101
PLAY
DRR-F101
CD SRS REC
REVERSE
MODE
CASSETTE DECK DRR-F101
5