Chicco urban Instrucciones De Uso página 8

GB
IMPORTANT INFORMATION
IMPORTANT- KEEP THESE INSTRUC-
TIONS FOR FUTURE REFERENCE.
WARNING: BEFORE USE, REMOVE AND
DISPOSE OF ALL PLASTIC BAGS AND
PACKAGING MATERIALS AND KEEP
THEM OUT OF REACH OF CHILDREN.
In order to fit the Chicco AutoFix or Chicco KeyFit car seats, the
adapter must be fitted to the Chicco Urban stroller.
WARNINGS
WARNING: The adapter can
only be used with the Chicco
Urban Stroller.
WARNING: Only the Chic-
co AutoFix or Chicco KeyFit
car seats can be fitted to this
adapter.
WARNING: Before use, check
correct fixing of the adapter to
the frame of the stroller.
WARNING: Before use, check
correct fixing of the car seat to
the adapter, pulling it upwards.
When not in use, keep the adapter out of reach of children.
The adapter is provided dismantled and consists of 4 components
(fig. 1-1A)
For assembly of the components refer to the images, making sure
that the metal pins (fig 2) are correctly inserted into the relative
holes.
Insert the tube A fitted with two metal pins, positioned at the
ends of the tube, into the plastic corners of the tubes B and C (Fig.
3-3A). To finish the assembly operation, insert the tube D into the
tubes B and C (fig. 4-4A).
Once assembly has been completed, the adapter is ready to be
fitted onto the stroller. (fig.5).
WARNING: The adapter should be fitted as illustrated in figure 6.
At this point the car seat can be fitted.
In order to fit the Chicco AutoFix Fast car seat, insert the pins of
the car seat in to the adapter at the same time, until a double click
confirming correct fixing, is heard. The AutoFix car seat can only
be fitted facing the parent pushing the stroller (fig. 7).
In order to fit the Chicco KeyFit car seat, it must be positioned
on the adapter until a double click confirming correct fixing, is
heard. The Keyfit car seat may be fitted in two different configura-
tions: facing the direction of travel or facing the parent pushing
the stroller. We recommend fitting facing the parent pushing the
stroller for greater visual control of the child.
Please consult the relative instructions for information on how to
fit and remove the child car seat.
In order to remove the adapter from the structure of the stroller,
work, at the same time, on the buttons indicated in figure 9. At
this point it is possible to install the seat previously removed.
ADVICE FOR CLEANING AND MAINTENANCE
Cleaning and maintenance operations should only be carried out
by an adult.
CLEANING
Dry the metal parts, after possible contact with water, in order
to avoid the formation of rust. Do not use solvents or abrasive
products for cleaning. After use keep the adapter in a dry place.
8