3. Base Assembly
Loosen screws from fan base then put motor cover and tighten the screw together.
OPERATION
Place the assembled fan on a flat, level, firm and dry surface.
Plug the power cord into wall outlet.
Turn the fan on and select desired speed using speed control switch.
The fan's direction can be adjusted relatively by loosening the thumb screw at the bottom of the motor
assembly, and rotating the fan head.
To set the fan into oscillation, Press the oscillation, knob on the top of the motor assembly, the fan head will
pivot side-to-side and up and down .For stationary operation, pull up on the oscillation knob.
Warning:
This appliance is equipped with a grounded 2‐pin power supply cord. This is a safety feature. Do not attempt to defeat
the safety purpose of this plug.
CLEANING AND MAINTENANCE
1. Always remove the plug from the power outlet before starting to clean the appliance.
2. Remove outer grill, unscrew locknut and remove blade from the fan.
3. Clean blade and grill assembly with a damp cloth.
4. Wipe off dust with a lint free cloth. A vacuum cleaner hose can be used to clean.
5. Do not use harsh or abrasive cleansing agents.
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered
by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste
stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the
environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchase the product.
SPECIFICATION
Model no.:
SF‐5003 / SF-5004
Voltage:
220‐240V ~ 50Hz
Wattage:
40W
This product is guaranteed for a period of 2 years from the date of purchase against defects in materials and
workmanship. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective,
provided the product is brought back to the purchase address. This guarantee is only valid if the appliance has been used
in accordance with the instructions, and that it has not been modified, repaired or interfered with by any unauthorized
person, or damaged through misuse.
This guarantee does not cover wear and tear, or breakables such as ceramic items, etc. If the product fails to operate and
needs to be returned, pack it carefully, enclosing your name and address and the reason for return and bring it to the
address of purchase. If within the guarantee period, please also provide the guarantee card and proof of purchase.
E-mail Service Address:
info@swisselektro.com
GUARANTEE
ENGLISH