Electrical Requirements; Grounding Instructions; Parts And Features; Exhaust Ventilation - Whirlpool 63792 Manual De Uso Y Cuidado

Electrical Requirements

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Observe all governing codes and ordinances. A 120 Volt, 60 Hz,
AC only, 15- or 20-amp fused electrical supply is required. (A
time-delay fuse or circuit breaker is recommended.) It is
recommended that a separate circuit serving only this appliance
be provided.

GROUNDING INSTRUCTIONS

For all cord connected appliances:
The microwave oven must be grounded. In the event
of an electrical short circuit, grounding reduces the
risk of electric shock by providing an escape wire for
the electric current. The microwave oven is equipped
with a cord having a grounding wire with a grounding
plug. The plug must be plugged into an outlet that is
properly installed and grounded.
WARNING:
Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions
are not completely understood, or if doubt exists as to
whether the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician or serviceman
install an outlet near the microwave oven.
For a permanently connected appliance:
This appliance must be connected to a grounded,
metallic, permanent wiring system, or an equipment
grounding conductor should be run with the circuit
conductors and connected to the equipment
grounding terminal or lead on the appliance.
SAVE THESE INSTRUCTIONS
This device complies with Part 18 of the FCC Rules.
6

PARTS AND FEATURES

This manual may cover several different models. The model you
have purchased may have some or all of the features shown here.
The appearance of your particular model may differ slightly from
the illustrations in this manual.
1 2 3
1. Door Handle
2. Door Safety Lock System
3. Metal-Shielded Window
4. 3M FILTRETE™ Charcoal Odor
Filter (behind vent grille)
5. Grill Element
6. Microwave Inlet Cover
7. Oven Light
8. Vent Grille
9. Touch Screen Display
10. Dial and Control Pads

Exhaust Ventilation

The first time power is supplied to the oven the "Welcome"
screen will appear, prompting the selection of the venting method
being used.
The method of ventilation determines whether or not the odor
filter (3M FILTRETE™ charcoal filter) will be used. If the setting is
Recirculation, the odor filter will be used, and the oven will track
the filter usage and give prompts for its changing. If the setting is
External Venting, the odor filter will not be used, and the oven will
not track or give prompts for odor filter status.
To determine how the venting was installed, turn on the exhaust
fan and check the airflow. If air is coming from the top front of the
oven, it is being recirculated. If there is a vent outside through
which the air is being vented, the oven has External Venting.
If the "Welcome" screen does not appear, the default setting has
already been selected. The current setting may be checked for
correctness, and may also be changed at any time through the
Options menu.
To Check or Change Exhaust Setting:
1. On "Home" screen, touch "More Choices."
2. Touch "Options."
3. Touch "More Choices."
4. Touch "Exhaust/Odor Filter."
5. Touch "Exhaust Setting."
The current setting will be displayed, as well as the option to
change the setting.
6. Touch "Finished" if the setting is changed.
4 6 7 8 9
5
ADJUST
+
P OPCORN C OOK T IME URNTABLE T
POWER ON/OFF
A DD ONE K ITCHEN
MINUTE TIMER SET/OFF
S O FF
TART
CANCEL
ON / OFF / ADJUST ON / OFF / ADJUST
15 13 14 13
12 12
11. Exhaust Fan and Cooktop
Light Controls
12. Cooktop Lights
13. Grease Filters
14. Cooking Rack
15. Model and Serial Number Plate
Parts and Features Not Shown
Turntable
Grill Rack
Skillette Pan and Handle
11 10