miniland baby ozonball Manual Del Usuario página 13

- Use cold boiled water or distilled water.
- Clean the transducer, water tank and base every week, if possible
with a vinegar and then rinse with clean water.
- Change the water in the water tank more often to keep it fresh.
- Make sure you empty the water from the water tank and dry it
thoroughly before storing the unit for a long period of time.
- Clean the whole unit and make sure that all parts of the unit are dried
thoroughly before storing for a long period of time.
How to clean the filter system
1 Separate the filter from the tank cover.
2 Put the filter system into salty water for
24 hours.
3 Take the filter system out of the salty water; shake several times,
rinse it with clean water.
4 Dry thoroughly and store in a plastic bag. Keep it in a cool place
out of direct sunlight.
How to clean the transducer
1 Put 5-10 drops of vinegar on the surface of the transducer and
leave for 2-5 minutes.
2 Remove the incrustation from the surface.
3 Use a clean dry cloth to wipe the transducer.
How to clean the basin unit:
If you find dirt or any incrustation on it, use detergent and wipe
clean with a cloth
Product disposal information
· Remember to dispose of the product responsibly.
· Do not mix products bearing the crossed -out bin symbol
with your general household waste.
· For the correct collection and treatment of these products
take them to the collection points designated by your local
authority. Alternatively contact the retailer who sold you the product.