International Safety Symbols; Preparation Of The Meter For Operation - Sonel CMP-1006 Manual De Uso

Do not exceed the maximum allowable input range of any
function.
Do not apply voltage to meter when resistance function is
selected.
Set the function switch OFF when the meter is not in use.
Remove the battery if meter is to be stored for longer than 60
days.
2.1

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indi-
cates the user must refer to the manual for further infor-
mation.
This symbol, adjacent to a terminal, indicates that, under
normal use, hazardous voltages may be present
Double insulation

3 Preparation of the meter for operation

Before measurements commence, it is necessary to realise the fol-
lowing actions:

Make sure the conditions of the batteries or accumulators per-
mit to realise measurements,

Make sure the casing of the meter and the insulation of the test
leads are not damaged,

Insert the black test lead into the negative COM terminal and
the red test lead into the V·Ω·
Connection of inappropriate or damaged test leads consti-
tutes a risk of an electric shock with a dangerous voltage.
ATTENTION!
WARNING:
CMP-1006 – USER MANUAL
o o
C· F·Hz positive terminal.
29