Introduction; Intended Purpose - Parkside PTK 2000 C3 Traducción Del Manual De Instrucciones Original

GB IE
Content
Introduction .......................................................... 20
Intended purpose .................................................. 20
General description ............................................... 21
Extent of the delivery .....................................................21
Overview .....................................................................21
Functional description ....................................................22
Technical data ....................................................... 22
Safety instructions ................................................. 22
Symbols and icons ........................................................22
Symbols on the appliance: .............................................22
Graphical symbol additionally on the saw blades .............22
Symbols in the manual ...................................................22
Safe operation ..............................................................23
Additional safety instructions ..........................................23
Safety instructions for handling saw blades ......................24
Assembly and Attachment of Tools and Tool Parts ..............24
Safety Instructions for Handling the Laser .........................25
Safety Instructions for Handling Batteries ........................25
Residual Risks ...............................................................25
Electrical Connection .....................................................25
Important Instructions .....................................................25
Faulty Electrical Connection Cable .................................25
Alternating Current Motor ..............................................26
Assembly .............................................................. 26
Mounting of the Frame ...................................................26
Mounting the table width and length extension ................26
Mounting / adjusting the Riving Knife ..............................26
Mounting / dismounting the Saw Blade Guard ................27
Replacing the Table Insert ...............................................27
Attaching/changing the Saw Blade .................................27
Connect the suction device .............................................27
Before putting into operation ..........................................27
Operation ............................................................. 27
Switching on and off .....................................................27
Adjusting the Cutting Depth ............................................27
Working with the Parallel Stop ........................................28
Adjusting the Stop Height .............................................28
Turning the Stop Rail ......................................................28
Adjusting the Cutting Width .........................................28
Adjusting the Stop Length ...............................................28
Adjusting the Parallel Stop ............................................28
Transverse stop .............................................................28
Adjusting the Scale of the Transverse Stop ........................28
Angle Adjustment ..........................................................28
Adjusting the Laser .......................................................29
Using the Laser ............................................................29
Use ...................................................................... 29
Performing Longitudinal Cuts .........................................29
Cutting narrow Workpieces ..........................................29
Cutting very narrow Workpieces .....................................29
Performing Bevel Cuts ....................................................29
Performing Transverse Cuts .............................................29
Cutting Chipboard ........................................................30
Collection bag for wood residues ....................................30
Transport .....................................................................30
Cleaning and Servicing.......................................... 30
Cleaning ......................................................................30
Storage ................................................................. 30
Waste disposal and environmental protection ....... 30
20
Spare parts/Accessories ........................................ 31
Trouble shooting ................................................... 31
Guarantee ............................................................ 32
Repair Service ....................................................... 32
Service-Center ....................................................... 32
Importer ............................................................... 32
Translation of the original
EC declaration of conformity ................................ 100

Introduction

Congratulations on the purchase of your new device. With it, you
have chosen a high quality product.
During production, this equipment has been checked for quality
equipment is therefore guaranteed.
The operating instructions constitute part of this product. They
contain important information on safety, use and disposal.
Before using the product, familiarise yourself with all of the oper-
ating and safety instructions. Use the product only as described
in the event that the product is passed on, hand over all docu-
ments to the third party.

Intended purpose

The table circular saw is used for cutting all types of wood lengt-
hwise and crosswise (only with the transverse stop), depending
on the machine size. All types of round timbers must not be cut
with it. The machine may be used only for its prescribed purpose.
Any other use beyond that is considered to be not in accordance
with the designated purpose. The user/operator is liable for all
types of resulting damage or injury and not the manufacturer.
The only saw blades which may be used are those which are sui-
table for the machine (HM or CV saw blades).
The use of any type of HSS saw blades and cutting discs is
prohibited. Use in accordance with the designated purpose is
also deemed to include observance of the safety instructions, as
well as the assembly and operating instructions in the operating
manual.Individuals who operate and maintain the machine must
be familiar with it and must have been instructed in possible ha-
zards. Moreover, the latest accident prevention regulations must
onal health and safety technology must be complied with.
Caution! When using equipment, certain safety precautions
must be complied with in order to avoid injuries and damage.
You should therefore read these operating instructions / safety
instructions carefully. Keep these in a safe place so that the infor-
mation is available to you at all times. Should you give the de-
vice to anyone else, please give them these operating instructions
/ safety instructions as well. We assume no liability for accidents
or damage caused by failure to observe these instructions or the
safety instructions. Changes to the machine will cause the ma-
nufacturer's liability with respect to any resulting damage to be
completely excluded. Even when the device is used in accordan-
ce with the designated purpose, it is nevertheless not possible to
completely eliminate certain residual risk factors. Due to the de-
sign and structure of the machine, the following risks may occur:
-