Connection With Adapter; To Release; Start-Up; Working Instructions - Parkside PFR 28 B2 Traducción Del Manual De Instrucciones Original

GB IE

Connection with adapter

1. Attach the adapter (1) to the exten-
sion element (4) or the connecting
element (
90° until it locks into place (bayo-
net locking device). Screw the cap
nut (3) of the extension element (4)
against the adapter (1).
2. Connect the spray gun (bayonet
locking device) and screw the
cap nut (2) of the adapter (1)
against the spray gun.

To release

1. Release the retainer nut of adapt-
er ( 2) on the adapter (
2. Loosen retainer nut (
extension element (
3. Release the catches by pushing
and turning through 90° in the op-
posite direction (Bayonet catch).

Start-up

Working instructions

Take heed of the backstroke
generated by the jet of wa-
ter. Stand firmly and hold
the jet gun tightly. You may
otherwise injure yourself or
others.
• Do not release water from the pressure
washer until the patio cleaner rests on
the surface you are cleaning.
• Always hold the patio cleaner by the han-
dle ( 9) when washing down walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed for
scouring out or scrubbing.
14
5) and turn it through
1).
3) on the
4).

Pressure control

1. You can adjust the pressure of the
escaping water jet by turning the
pressure regulator (10). Accor-
dingly, the rotation speed of the
nozzles changed
2. Increase the pressure (+) by tur-
ning the pressure regulator (10)
in a clockwise direction. Reduce
the pressure (–) by turning the
screw counterclockwise connnec-
tions.
Cleaning agent dose control-
ling
Once the cleaning operation has
been completed, fully turn the dose
controller (11) for the cleaning
agent (clockwise (–) ) until it closes
to prevent cleaning agent escaping.
1. You can automatically regulate
the volume of cleaning agent
that is released by turning the
cleaning agent dose controller
(11).
2. Turning the cleaning agent dose
controller (11) clockwise reduces
the volume of cleaning agent
(–). Turning it counter-clockwise
increases the volume of cleaning
agent (+) accordingly.

Cleaning agent tank

1. Screw on the cleaning agent tank
cap (7) in a counter-clockwise
movement. You can pour in up to
260 ml liquid cleaning agent.
2. Screw on the cleaning agent
tank cap (7) in a clockwise mo-
vement.