Use - Electrolux EFC9630 Manual Del Usuario

12 electrolux

USE

The hood can be switched on pushing directly onto the requested speed
EN
Touch Basic Functions
control
L When pressed it switches the lighting system on and off.
T1 When pressed the motor is stopped, regardless of the speed it is set to.
T2 When pressed the motor is set to the fi rst speed. (Led S1 on)
T3 When pressed the motor is set to the second speed. (Led S2 on)
T4 When briefl y pressed the motor is set to the third speed. (Led S3 on)
Alarm Signalling
Led Alarm type
S1 Metal grease fi lters saturation alarm.
When this led fl ashes it means that the metal grease fi lters need to be
washed. The alarm starts up after 100 working hours. (Reset; check the
paragraph "Metal fi lter")
S2 Charcoal fi lter saturation alarm.
When this led fl ashes it means that the Charcoal fi lter has to be
replaced and metal grease fi lters washed. The alarm starts up after 200
working hours. (Activation and reset; check the paragraph "Charcoal
fi lter").
Use
T1
Dual functions
When pressed for 4 seconds it resets the fi lter alarm signal, with a
consequent indication of fl ashing led S1 or S2. This procedure can
be carried out only when the motor is stopped. Once the reset pro-
cedure is over the led S3 fl ashes twice.
When pressed for 2 seconds the motor is set to the intensive speed
timed to 10 minutes (Led S3 fl ashes) . After 10 minutes of intensive
speed the hood starts again at the speed it was previously set to. In
case the hood is set to the intensive speed directly from OFF-state
it will then start from the fi rst speed after 10 minutes of intensive
speed.
S1 S2
T2 T3
S3
T4 L