71062MEE Rev2:Ion 441375253 Rev 1
Ú
Ò
4
8/7/08
A
OPERATING THE
APPLIANCE
Quick start
1
Assemble the combination floor
nozzle Ï, telescopic tube and hose
as shown. (Shown on page 4)
2
Pull out the mains cable to it's full
length and plug into the mains
supply.
B
3
Switch on by pressing the on/off
switch fi.
TOOLS AND
ACCESSORIES
1
Fit the hose to the cleaner by
inserting the hose end into the hose
inlet ⁄. When removing, squeeze
the clips either side and pull.
2
Attach the telescopic tube. Extend
to the required length by pushing up
the slider release and pulling out the
tube A.
The hose handle features an airflow
regulator which allows suction to be
reduced as required.
3
Attach your choice of floor nozzle to
the telescopic tube Î.
Combination floor
nozzle
The combination floor nozzle can be
adjusted to suit different floor
surfaces. Retract the brushes for
use on carpet. The brushes should
be down for use on hardfloors or
damage may occur.
Hand tools
The crevice tool Ú (for awkward
places, behind radiators etc) and the
upholstery nozzle with clip on
brush Ò (for curtains and
upholstery) are stored in the tool
drawer · B.
Using the large turbo
nozzle
(certain models only)
Attach the large turbo nozzle to the
telescopic tubes.
This nozzle is ideal for carpet and
especially effective at removing pet
hair.
11:08
Page 4
Using the small turbo
nozzle
Attach the turbo nozzle to the hose
handle Í only for use on upholstery
and stairs.
WARNING: The turbo nozzle
should not be used with the
extension tubes. Attach to the
hose handle only.
Cleaning the turbo
nozzles
The turbo nozzles should be
regularly cleaned and any hairs or
fibres wrapped around the brush bar
removed to maintain optimum
performance. To aid cleaning, the
small turbo nozzle can be opened
up by pushing the button on the
nozzle forwards. A cover on the
bottom of the large turbo nozzle
allows access to the turbine fan.
Hardfloor nozzle
(certain models only)
Attach the hardfloor nozzle to the
telescopic tubes. This nozzle is ideal
for use on wood, laminate, tile and
vinyl flooring.
Hair and Stair tool
(certain models only)
Attach the Hair and Stair tool ˆ to
either the 2 separate attachable
tubes, or the single telescopic tube
(dependent on model).
This tool ˆ is suitable for cleaning
the stairs, and when the additional
attachment is added, it is ideal for
picking up human and pet hair.
Stretch stair hose
An additional stretch hose is also
provided for use on stairs. Fit the
hose to the cleaner by inserting the
hose end into the hose inlet. When
removing squeeze the clips either
side and pull.
WARNING: For safety, always
leave the cleaner at the bottom
of the stairs and clean upwards.
WARNING: We do not
recommend using the stair hose
for general floor cleaning.
(certain models only)