Removing The Base Bracket Cover; Wiping Off Dirt On The Surface - Nabtesco NK-6 Symphony Manual De Instrucciones

7-3 Removing the Base Bracket Cover

Remove the Base bracket cover by
following procedures when replacing the
extension
stance-flexion rubber as described in 7-1
or 7-2.
1. Spread the Base bracket cover sideling.
2.
Remove the whole of the cover toward
the anterior direction.
2
Base bracket cover
1
Fig.22 Detaching the Base bracket cover

7-4 Wiping Off Dirt on the Surface

If necessary, wipe the surface with a soft
cloth moistened with fresh water.
Make sure that no moisture or lint from
the cloth remains after wiping. Rust and
lint caught in the knee may cause
abnormalities in the rotating part and
CAUTION
affect the bending and stretching of the
knee.
P.25
stopper rubbers
EN – 23
or the
1
Base bracket
51