IB-IPLHH170EU-0315-01_Layout 1 28/04/2015 09:31 Page 2
1
2
3
choose your desired treatment – skin rejuvenation or hair removal.
1
Hair removal: attach hair removal cartridge.
2
make sure the skin in the area you wish to treat is shaved, clean and dry
connect the power lead to duo and plug into the mains – the blue/white skin level
3
indicator lights will flash on and turn off and the green status light will illuminate to
indicate the power is connected
4
press the q button to switch on the duo.
press the q button to select an appropriate level for your skin tone. It is
5
recommended to carry out a skin test before first use on each area you wish to treat
(see page 5 for details).
hold the device against the treatment area, making sure the yellow treatment
6
window is in full contact with the skin. The green status indicator will stop flashing
when good skin contact is made and the duo is ready to flash.
for levels 1 - 3 ( FT FREEGLIDE™), hold the green trigger button down and glide the
7
duo across your skin. for levels 4 & 5 (IPL single shot) press the green trigger button,
hold the duo against the skin and wait for the flash - then move to the next
treatment area.
Please carefully read the full instructions and safety warnings before using Duo.
quick st rt guide
H ir remov l
4
7
6
3
3
5