Black and Decker BXSS2200E Manual De Instrucciones página 7

temperature.
Press and hold the steam button (C) for 10 seconds
Š During use the pilot light (B) will automatically flash on
and off, thus indicating that the heating elements are
operating in order to maintain the desired temperature.
Dry ironing:
Š The appliance has a steam and temperature control (E)
which when set to the MIN position allows dry ironing
(no steam).
Steam Ironing:
Š It is possible to iron with steam whenever the deposit
is filled with water and the adequate temperature is
selected.
Steam flow control:
Š The appliance allows the temperature (E) and steam
flow (C) to be regulated, to adjust the steam use ECO
for reduced power consumption while still maintaining
ironing quality or MAX for maximum steam flow.
Vertical steaming
Š It is possible to iron hanging curtains, items of clothing
on his hanger, etc. To do so, follow the instructions:
Š Select the maximum temperature of the iron, while tur-
ning the temperature regulator of the iron in a clockwise
direction.
Š Move the iron in a top to bottom direction while pressing
the steam control (C). Important: for cotton and linen, its
recommended to put the iron base in contact with the
material. For other more delicated fibres, it's recom-
mended to keep the iron base at some centimetres of
distance.
Anti-scale warning:
Š When the anti-scale cartridge is depleted and has to be
replaced, an indicator will light up on the control panel
(fig. 5), indicating that the cartridge has to be replaced.
Fit the new cartridge into its housing and press the RE-
SET button to reset the use control. Use demineralised
water to continue using an already depleted cartridge.
Once you have finished using the applian-
ce:
Š Select the minimum position (MIN) using the steam and
temperature control.
Š Unplug the appliance to the mains.
Š Remove the water from the water tank.
(Original instructions)
Š Clean the appliance
Cleaning
Š Disconnect the appliance from the mains and let it cool
before undertaking any cleaning task.
Š Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
Š Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
Š Do not submerge the appliance in water or any other
liquid, or place it under a running tap.
Š Quick cleaning guide:
Š Fill the tank with approximately 1 litre of water. (Do not
put vinegar or other descaling agents into the water tank)
Š Plug in the ironing system and set the temperature
control to MIN.
Š Hold the iron vertically over the sink and press the steam
button (C) for 1 minute to pump the water from the tank
to the iron.
Š Increase the iron's temperature setting to number 2
Š Place the iron horizontally over the sink, keep pressing
the steam button (C) and gently rock the iron backwards
and forwards for 1 minute.
Š Unplug the ironing system from the mains supply and
immediately rub the soleplate with a damp cotton cloth
folded several times. (Never use scouring pads or
chemicals).
* Repeat the cleaning process at least twice.
** We recommend performing the process once a month
to prolong the service life of the ironing system. If the
water in your area is very hard or you notice limescale
coming out through the soleplate during ironing, use this
function more often.
Anomalies and repair
Š Take the appliance to an authorised technical support
service if problems arise. Do not try to dismantle or
repair without assistance, as this may be dangerous.
WARRANTY AND TECHNICAL ASSISTANCE
Š This product enjoys the recognition and protection of the
legal guarantee in accordance with current legislation. To
enforce your rights or interests you must go to any of our
official technical assistance services.
Š You can find the closest one by accessing the following
web link: http://www.2helpu.com/.
Š You can also request related information, by contacting
us (see the last page of the manual).
ENGLISH
7