NOTE
For a continuous stable function of the console during exercise, it is recommend to use a power
adapter 9V 1.3A. If the console malfunctions, remove the charger and plug it in again. In the target
heart rate mode, the user must hold the handlebar or wear the chest strap. If the console is connec-
ted to a mobile device using the Bluethooth module, the console will switch off. Turn off the app and
unplug the Bluethooth connection to get the console back on.
CARE, CLEANING & MAINTENANCE
ATTENTION
Before cleaning, maintenance and / or repair work, the training device must be completely disconnec-
ted from the socket. For this disconnect the power cord from the electrical socket and the training
device. The power cord may be reconnected to the exercise machine and the socket when all jobs
have been fully completed and the proper training status of the device is restored.
Cleaning
Clean your exercise equipment after each training session. Do this with a wet cloth and soap. Do not
use solvents. Regular cleaning makes a significant contribution to the preservation and longevity of
your exercise machine. Damage caused by perspiration or other liquids, are not covered at any time
by the warranty. Also pay attention during training that no liquid can enter into the training device or
computer.
MAINTENANCE
Since only sealed bearings were used in your exercise equipment, a lubrication of the bearings is not
required.
VERIFICATION OF THE FIXING MATERIAL
Check at least 1x a month the tightness of bolts and nuts. Screw up this, if necessary, again.
VERIFICATION OF COMPONENTS
Check before each training the safe seat of saddle, seat post, handlebars and pedals.
CAUTION: Never train when one or more of these components are loosely.
38