Storing The Appliance; Help With Problems - NUK Thermo Ultra Rapid Manual Del Usuario

2. After this time, empty the appliance, rinse
out twice with clean water and then wipe dry.

7.4 Storing the appliance

• We recommend that you retain the packaging
of the NUK Baby Food Warmer so that the
device can be packed securely if it needs
transporting.
Faults can occur in any electrical appliance. This does not necessarily mean that the appliance is
defective, so please check the list to see whether the fault can be eliminated.
Problem
Appliance not working. There is no power supply.

8. Help with problems

Reason
Mode selector switch in OFF or
incorrect position
Fuse in vehicle adapter defective
The automatic cut-out
(thermostat) is still active
Excessive temperature cut-out
has responded
• To store the NUK Baby Food Warmer, clean
the device after use and assemble once
completely dry.
• Store the NUK Baby Food Warmer in a dry,
cool place.
• Do not place any bottles or other items in the
warming tank when the device is not being
used.
Check whether the plug is in a socket.
Check the fuses at the fuse box in your
home.
"Home" mode: set the mode selector
switch to "Home".
"Car" mode: set the mode selector
switch to "Car".
(see "6.1 Select the operating mode,
switching on and off" on page 23)
Check whether the fuse is defective. In
this case, replace the defective fuse
(see "8.1 Replacing the fuse" on
page 28)
Wait 15 min. until the device has cooled
down and can be switched on.
Take the plug out of the socket. Contact
the service address (see "Contact
addresses" on page 108).
27
Remedy
G
B