Battery Safety - Stanley FATMAX FMHT1-77359 Manual De Instrucciones

Battery Safety

WARNING!
Batteries can explode or leak and can cause injury or fire. To reduce this risk:
ALWAYS follow all instructions and warnings on the battery label and package.
DO NOT short any battery terminals
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and
type.
DO NOT mix battery chemistries.
DO NOT dispose of batteries in fire.
ALWAYS keep batteries out of reach of children.
ALWAYS remove batteries if the device will not be used for several months.
NOTE:
Ensure that the correct batteries as recommended are used.
Ensure the batteries are inserted in the correct manner, with the correct polarity.
End of Life
DO NOT dispose of this product with household waste.
ALWAYS dispose of batteries per local code.
PLEASE RECYCLE in line with local provisions for the collection and disposal of electrical and electronic waste under
the WEEE Directive.
Declaration of Conformity
Stanley Tools declares that the CE Mark has been applied to this product in accordance with the CE Marking Directive
93/68/EEC.
For further details please refer to www.stanleytools.com.
ROHS Compliant
Description
The GRD 240 - Machine Control Receiver provides accurate grade information for machine control applications with
a range of 230° horizontal detection of a rotating laser. It attaches to the excavator arm with via rare earth magnets,
and is easy to detach using the release lever.
It has three accuracy levels:
These LED indicators show the height of the bucket or blade in relation to the laser reference beam.
Power
The receiver uses (3) AA alkaline batteries which can provide up to ~130 hrs of use. The battery indicator LED will light
when the batteries have 8 hrs of life remaining.
1.
Unscrew Battery Compartment Knob
2.
Place (3) AA batteries into unit, negative side first.
1.
Fine, 3 channel
Fine, 5 channel
Coarse, 3 channel
2.
3