Product Description - Concept ZA7035 Manual Del Usuario

EN

PRODUCT DESCRIPTION

1 Comb attachment
2 Blades
3 Cutting length adjustment knob
4 Switch lock
5 Switch
6 Battery status indicator
1
2
46
The package also includes:
- Oil for lubrication of blades
- Comb
- Brush
- Charger
5
6
3
4
ZA7035
OPERATING INSTRUCTIONS
The appliance is designed for cutting hair and beard.
CUTTING
WARNING! Use the hair trimmer only on dry hair. Do not use on freshly washed hair!
Note: The trimmer can be operated with an AC adapter (if the battery is at least partially charged) or only on
a charged battery.
1. Position the person to be trimmed in front of you on a chair so that the top of the head is at the height of your
chest.
2. Cover the neck and shoulders of the person to be trimmed against falling hair.
3. Comb the hair.
4. Attach the comb attachment to the trimmer head. Set the desired cutting length by turning the knob (3). The cutting
length can be adjusted from 1-10 mm.
5. Cut your hair in slow, repeated movements. Always cut small parts of hair.
6. For best haircut results, always move the hair trimmer against the direction of hair growth.
7. For easier cutting of longer and wavy hair, you can guide the hair with a comb against the blades. Remove the cut
hair so that the cutting mechanism does not get clogged.
8. To adjust the length of the hair around the ears and back of the neck, remove the comb attachment.
9. Comb the hair ends over the ears before cutting the line around the ears. To align the hairline at the back of the
neck and at the neck, rotate the cutting mechanism perpendicular to the skin and create a clean hairline with a slow
downward movement.
10. Always turn off the appliance when you put it down during use.
11. After use, switch off the appliance and remove the attachment (if used).
12. If you use the appliance in the bathroom, be sure to switch it off and unplug it immediately after use, as the proximity
of water and the appliance's contact with water is very dangerous, even when the appliance is turned off!
The appliance must be switched off when attaching/removing the comb attachment!
ZA7035
EN
47