Care And Maintenance - Klarfit Treppo Manual De Instrucciones

TOTAL STEPS ( T.CNT)
TIME (TIME)
CALORIES (CAL)

CARE AND MAINTENANCE

Note: As with all training machines with mechanical, moving components,
screws may loosen due to frequent use. We therefore recommend that you
check them regularly and, if necessary, retighten them with a suitable key.
Clean your training device regularly with a damp cloth to clean the surfaces
from sweat and dust.
• When you don't use the exercise bike for a long time, please take out the
console battery to avoid running out of battery.
• Often clean the exercise bike with clean cloth to keep the clean
appearance.
• The safety level of the equipment only can be maintained if it is regularly
examined for damage and or /wear and tear.(e.g. handle bar, pedals and
seat ...etc.).It is vital that any faulty parts are replaced and the it is not used
until completed repaired.
• Regularly check that the elements fastened with nuts and bolts are
correctly tightened.
• Remember regularly to grease moving parts.
• Special attention to the component, most of them are susceptible to wear
like brake system, foot pad etc.
• As sweat is very corrosive, do not allow it to come into contact with the
enameled or chromed parts of the equipment, particularly the computer.
Immediately wipe the equipment after using. The enameled parts can be
cleaned using a damp sponge. All aggressive or corrosive products must be
avoided.
• Storing the equipment in a clean and dry environment away from children.
Total number of steps since commissioning. Value is
deleted when the battery is changed.
Shows the elapsed time since the start of training. For a
countdown function, press SET repeatedly in TIME mode
to set a time from 1 - 99 minutes. As soon as 0 is reached,
the computer emits 2 beeps. The countdown timer can be
reset by pressing RESET.
Shows the calorie consumption since the beginning
of training. For a countdown function (target calorie
consumption), press SET repeatedly in CAL mode to set a
calorie number from 1 - 999. As soon as 0 is reached, the
computer emits 4 beeps. The calorie countdown can be
cleared by RESET.
EN
41