EDELRIDe Serius Industry Manual Del Usuario página 13

EN
SERIUS HEIGHT WORK
INFORMATION ON USE, SAFETY, LIFESPAN,
STORAGE AND CARE
This product is part of personal protective equipment
(PPE) and should be assigned to a specific person.
These instructions for use contain important notes,
a control
card and a proof of inspection (test book).
Before using this product, all documents must have
been read and their content understood.
This document must be provided to the user by the
retailer in the respective country's language and
must be kept with the equipment while it is in use.
Instructions for use
These instructions must be carefully read and fol-
lowed. This product has been manufactured espe-
cially for working at heights and in depths and does
not release the user from any personal liability.
Mountaineering, climbing and working at heights
and in depths often harbour hidden dangers and
risks caused by external influences. Risk of acci-
dents must never be excluded. In order to achieve
maximum safety when mountaineering, climbing and
working at heights and in depths, safe use of equip-
ment is only guaranteed if it complies with industrial
norms.
For more detailed and comprehensive information,
please refer to relevant special literature.
The following instructions are important to ensure
appropriate and correct use of the equipment. How-
ever, they cannot replace experience, responsible
behaviour and awareness of the risks inherent in
mountaineering, climbing and working at heights and
in depths and do not release the user from any per-
sonal responsibility. Use of the equipment is only
permitted to fit and experienced individuals or under
appropriate guidance and tuition.
Users must be aware that poor physical and mental
health can jeopardise safety under normal condi-
tions and in emergencies.
Before using the equipment, users must familiarise
themselves with safe and effective rescue proce-
dures.
The manufacturer cannot be held liable if the equip-
ment has been abused or used incorrectly.
All risks and responsibilities are borne by the user at
all times.
When using this product in the areas of rescuing and
personal protective equipment, we recommend that
the relevant national regulations be observed.
PRODUCT-SPECIFIC INFORMATION
Specification
This product meets obligatory requirements of EN
397, except for the retention system.
The retention system has a strength of at least 50
daN, and elongation of the whole system is not
longer than 25 mm (requirement of EN 12492).
Additionally the product meets optional require-
ments of EN 397: Protection against impact under
low temperature -30°C.
This product meets obligatory requirements of
ANSI/ISEA Z89.1-2014 Type I Class G.
Fitting
To provide safe protection, this helmet must be
adapted to the head size of the user. The safety