Cosatto NITTY GRITY HOLD Manual Del Usuario página 7

Handle 11-
12-
Hood 13-
14-
15-
16-
Removing 17-
softgoods
18-
Push strap clip through seat (2).
Re-position in alternative slot (3).
Adjusting:
Handle positions:
(1) Carrying position (2 & 3) Stow position (4) Steady position.
Fitting:
Opening:
Closing:
Removing:
Unfasten the poppers (1).
Using a ball point pen push in the button on the arm (2) then pull the
arm out of the hinge unit (3).
Pull the arms out of the hood fabric (4).
Loosen the harness 3 (1).
Disconnect shoulder straps from harness connector (2).
Pull shoulder straps out of seat (3) and chest pads (4).
Push crotch strap clip through seat (5).
Remove harness (6).
Pull elastic bead on cover away from the seat (1).
Unhook the cover (2) from under the vehicle seat belt guides.
Work around the edge of the child car seat until the cover can be
pulled clear.
Refitting is a reversal of this procedure.
Note: Never remove the backing foam from the
child car seat.