bosal 010-678 Manual De Instrucciones página 4

7.
Draw end of bunch with L marker to left rear lights:
a) Disconnect left rear lights joint in vehicle and connect with suitable joint in electric bunch,
b) Connect remaining electric bunch joint with left lights joint.
8. Connect brown (7-pin) and white/brown (13-pin) leads to earth (for instance drill the 3mm hole and connect and
fix the eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion remedy).
9.
Trailer power supply:
Refer to 13-pin version. 3-pin connector housing (red/blue, yellow, and white/brown cables) is provided for expan-
ded socket functions. Put this part of cable set behind the trim. To expand socket functions it is necessary to order
the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth" part no. 015-069
Secure the cable set with supplied cable ties, re-install all trims and other parts which were removed during instal-
lation.
Connect the earth lead to the battery and check all vehicle functions with connected trailer or suitable testing de-
vice.
part no. 014-169