4. Replace the top part
again with the fixing screw
The filter units are inserted.
Placing the device in the pool
The device can hurt persons in the pool.
- Make sure no one is in the pool while the device is in the water.
A lawnmower can damage a cable placed on the ground.
- Route the cable so that it cannot be damaged by a lawnmower or
similar device.
1. Completely unroll the floating cable
2. Hold the device by the handle
lower it slowly and tilted slightly
forward into the water until sufficient
air has escaped and it sinks to the
bottom. Slowly feed the floating
cable
to control lowering. The device
5
should run at a right angle to the pool
wall.
The device is in the pool.
and screw it down
2
.
1
CAUTION!
Risk of injury!
NOTICE!
and place it next to the pool without twisting.
5
and
3
3
1
2
4
37