Description Of The Device; Active Vibration Reduction (Avr); Items Supplied; Technical Data - Hilti TE 30 Manual De Instrucciones

▶ Operation is permissible only when connected to a power source providing a voltage and frequency in
compliance with the information given on the type identification plate.

3.3 Description of the device

3.3.1 Active Vibration Reduction (AVR)

TE 30-AVR
TE 30-C-AVR
The combihammer is equipped with an Active Vibration Reduction (AVR) system, which reduces vibration
significantly.

3.4 Items supplied

Rotary hammer, side handle, depth gauge, operating instructions.
Note
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.com.

4 Technical data

When powered by a generator or transformer, the generator or transformer's power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
The information given applies to a rated voltage of 120 V. The data may vary in the event of deviations from
the rated voltage and for country-specific versions. Please refer to the power tool's type identification plate
for details of its voltage, frequency, current and input power ratings.
Rated current in-
put
Weight
Single impact energy
Ø hammer drill bits
Ø hammer drill bits
Ø drill bits for wood
Ø drill bits for wood
Ø drill bits for metal
Ø drill bits for metal
5 Operation
Fitting the side handle
CAUTION
Risk of injury The depth gauge may hinder the operator if fitted but not used.
▶ Remove the depth gauge from the tool.
CAUTION
Risk of injury! Loss of control over the combihammer.
▶ Check that the side handle is fitted correctly and tightened securely. Check that the
clamping band is engaged in the groove provided on the tool.
Model
TE 30
120 V 8.3 A
8.8 lb
(4.0 kg)
3.3 J
3/16 in ... 1 1/8 in
5 mm ... 28 mm
1/4 in ... 1 in
5 mm ... 20 mm
3/16 in ... 1/2 in
3 mm ... 13 mm
TE 30­AVR
8.3 A
9.3 lb
(4.2 kg)
3.3 J
3/16 in ... 1 1/8 in
5 mm ... 28 mm
1/4 in ... 1 in
5 mm ... 20 mm
3/16 in ... 1/2 in
3 mm ... 13 mm
Spare parts,
TE 30­C­AVR
8.3 A
9.3 lb
(4.2 kg)
3.3 J
3/16 in ... 1 1/8 in
5 mm ... 28 mm
1/4 in ... 1 in
5 mm ... 20 mm
3/16 in ... 1/2 in
3 mm ... 13 mm
2
5