Publicidad
3. Function Indication
3-1. UNIT: Press "UNIT" on back the scale to select desired unit in weighing mode
4. Operation instruction
4-1. Select unit before use
a) Open the battery door at the back of the scale.
b) Put the battery in and ensure +/- terminals are correct. The LCD will be on as below.
c)Closet he battery door and wait until "0.0kg" is shown.
d) Press "UNIT" to select the desired unit.
Note: Please put the scale on flat hard ground after finishing selecting unit, then you can start to
standing on the platform to measure according to the measuring procedure below.If there is not any
operation in weighing mode, the scale will turn off automatically after about 10s.
4-2 Measuring (unit kg selected)
a) Please put he scale on flat and hard ground.
b) Please stand on the platform directly to switch on.
c) Stand still and the weight data will be locked automatically after blinking when stable. Then the scale
will turn off after about 10s.
Note: If you want to measure once again, please step off, then step on the platform again.
5. Indication message
5-1. Low battery indication. When "Lo" is shown, the scale will turn after off after a few seconds and
please change the battery.
Publicidad
