3.2 Choosing the right Cookware
Do not use cookware with jagged edges or a curved base.
Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
3.3 How to use
3.3.1 Start cooking
After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF
control. all the indicators
show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Select a heat setting by touching the "+" or "-" control.
• If you don't choose a heat setting within 1 minute, the ceramic
hob will automatically switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of these buttons, the value will adjust
up or down.
EN-9