Touching the "-" and "+" together, the timer is cancelled, and the
"--" will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator will
flash for 5 seconds
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) If you want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
3.3.7 Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter " H "appears
to warn you to keep away from it.
3.3.8 Default working times
Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off a
cooking zone. The default shutdown times are shown in the table below:
Power level
Default working timer (hour)
4. Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly if you're using
PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this
presents a serious fire risk.
4.1 Cooking Tips
When food comes to the boil, reduce the temperature setting.
Using a lid will reduce cooking times and save energy by retaining the heat.
1
2
3
4
8
8
8
4
EN-13
5
6
7
8
4
4
2
2
9
2