Zero Moustique LDS16-40AD-RC Manual De Instrucciones página 22

17. Adapter
18. Remote control
19.Snapping lock pin
20. Lock screw
ASSEMBLING THE BASE
For pedestal use For table use
For pedestal use :
- Remove the parts from the packaging. Place the fan base (#16) on the floor.
Insert the lower column (#14) with the adapter (#15) into the base and fix them
by turning the lower column (#14) clockwise.
- Loosen the height adjustment lock nut (#13) and pull the adjustable column
(#12) upwards to the desired height and tighten the height adjustment lock nut
(#13).
- Place the upper column (#8) on the adjustable column (#12). Tighten the column
adjustment knob (#10).
For table use :
- Place the fan base (#16) on the table, insert the adapter (#17) into the base and
secure them by turning the adapter (#17) clockwise.
- Place the top column (#8) on the adapter (#17). Tighten the upper column
adjustment knob (#10).