Festo TP1410 Instrucciones De Utilizacion página 70

Servo brake and drive system
9.4.3 Speed Control operating mode
How to start the "Speed Control" measurement
The test specimen should already be switched on before activating the speed control. The current rotational
speed of the test specimen is accepted by activating the speed control on display no. 1.
The speed value now inversely displayed can now be changed by turning the rotary knob.
Stopping the measurement
1. Press the rotary knob.
Display no. 2 is displayed and the measurement is stopped.
70
© Festo Didactic 8121048